SCRT® DENIM GUIDE

Selvedge denim is made using traditional shuttle looms, where a single thread is woven back and forth in a continuous motion, creating a self-bound edge on both sides. This edge prevents the fabric from fraying, which is why it's called "selvedge" or "self-edge" denim. On jeans, the selvedge is typically used for the outseam, and can be seen when folding the hem. The machinery can be over 100 years old and requires expert artisans who know their way around the looms. As a result, the process is slower, and the output is more limited.

We suggest you wear your denim for at least six months before you wash them. The first wash will reveal fades with more indigo dye being washed off in the areas of stress.

Here’s how we wash our denim: 

1.⁠ ⁠Empty your pockets, un-cuff your jeans and turn the garment inside out.

2.⁠ ⁠Pre-soak. This will soften them and minimise the risk of getting bad wash effects.

3.⁠ ⁠The washing machine should be set at 30°C (or below). The lower the spin cycle, the gentler the wash. Don't use detergent that contains bleach.

4.⁠ ⁠Remove the garment immediately after the washing cycle is done. Leaving the jeans crinkled and wet in the washing machine can cause uneven distribution of dye.

5.⁠ ⁠Hang to dry. Do not tumble dry.

Be aware of colour transfer from raw denim onto lighter surfaces, clothing & footwear, especially when new. The colour will fade after the first wash, and as you break in your jeans, the indigo will continue to fade, allowing every crease and scuff to tell a story. Expect up to 3% shrinkage after the first wash. A pair of jeans with a 32″ inseam would shrink about 1” in length.

Denim looks best when it’s lived in. This guide is here to help you get the most out of your pair!